About Us
News and Events
Careers
Generation and Wires

Contact

Your Home
Your Business
Services
About Us
News and Events
Careers
Generation and Wires

Your Home
Your Business
Services

Electricity Services

- Electricity Services

Have a question?

Email: getconnected@enmax.com
Phone: 403-514-3716

Issues or suggestions?

If you encountered any issues completing the form, or would like to make a suggestion on how we can improve it, please fill out our feedback form.

Service Request Form

Is this request for a residential or commercial site?

Residential

Commercial

Service request

What type of service is requested?

What is your relationship to this project?

List other relationship:

What is the reason for your inquiry today?

List other reason:

Additional details

Please add any additional information about your project to help us better understand the scope/location.

Have you received email notification from ENMAX or the City of Calgary that there is a development permit conflict to be resolved?

YesNo

Provide development permit conflict number:

Is there on-site generation associated with this project?

YesNo

Is the generation stand alone or distributed?

Stand aloneDistributed

ENMAX will require further information regarding your on-site generation before providing acceptance to connect and operate your generator. Details on this process will be sent to your email upon completion of this form.

Start over Next

Your new service

Location:

OverheadUnderground

Phase:

Single phaseThree phase

Voltage:

Amperage:

Please accept that Current Transformer (CT) Metering and a dedicated electrical room is required for metered services greater than 200A. See metering guidelines for more information.

Start over Next

Additional details

Type of Load (commercial, warehouse, residential tower, data centre, etc.):

Building(s) Square Footage:

Number of transformers:

Size of transformers (kVA):

Total Transformer Capacity (kVA):

Anticipated demand load (kVA):

Staging/Timeline of Load Addition:

Description of Load Addition (type of development, modes of operation, intended uses, preferred/alternate sources, etc.):

Largest motor size (hp) (if applicable):

No motor499hp or smaller500hp or larger

List motor size (hp):

Additional motor information

Type (Induction or Synchronous):

Horse Power (hp):

Rated Voltage (V):

Efficiency:

Power Factor (PF):

Locked Rotor Power Factor (PF):

Number of times started per day:

National Electric Manufacturers Associateion (NEMA) code:

Starting method (Select one of the listed starting Methods):

Across the line starting

Resistor assistance

Capacitor assistance

Auto transformer

Variable frequency drive

Other type of starting method

Provide ohms:

Provide kVAR:

Provide Tap%, Nominal rating in kA, Z%, Primary Voltage in kVLL, and X/R:

Provide starting current in % of rated current OR starting current in % of locked-rotor current:

Provide starting current and full-load current:

What process / operation is the motor used for:

Secondary cable size:

Is it a parallel run?

YesNo

Have you received email notification from ENMAX or the City of Calgary that there is a development permit conflict to be resolved?

YesNo

Provide development permit conflict number:

Is there on-site generation associated with this project?

YesNo

Is the generation stand alone or distributed?

Stand aloneDistributed

Any additional details:

Start over Next

Your existing service

Location:

OverheadUnderground

Phase:

Single phaseThree phase

Voltage:

Amperage:

Start over Next

Your new service

Location:

OverheadUnderground

Phase:

Single phaseThree phase

Voltage:

Amperage:

Please accept that Current Transformer (CT) Metering and a dedicated electrical room is required for metered services greater than 200A. See metering guidelines for more information.

Start over Next

Additional details

Type of Load (commercial, warehouse, residential tower, data centre, etc.):

Building(s) Square Footage:

Number of transformers:

Size of transformers (kVA):

Total Transformer Capacity (kVA):

Anticipated demand load (kVA):

Staging/Timeline of Load Addition:

Description of Load Addition (type of development, modes of operation, intended uses, preferred/alternate sources, etc.):

Largest motor size (hp) (if applicable):

No motor499hp or smaller500hp or larger

List motor size (hp):

Additional motor information

Type (Induction or Synchronous):

Horse Power (hp):

Rated Voltage (V):

Efficiency:

Power Factor (PF):

Locked Rotor Power Factor (PF):

Number of times started per day:

National Electric Manufacturers Associateion (NEMA) code:

Starting method (Select one of the listed starting Methods):

Across the line starting

Resistor assistance

Capacitor assistance

Auto transformer

Variable frequency drive

Other type of starting method

Provide ohms:

Provide kVAR:

Provide Tap%, Nominal rating in kA, Z%, Primary Voltage in kVLL, and X/R:

Provide starting current in % of rated current OR starting current in % of locked-rotor current:

Provide starting current and full-load current:

What process / operation is the motor used for:

Secondary cable size:

Is it a parallel run?

YesNo

Have you received email notification from ENMAX or the City of Calgary that there is a development permit conflict to be resolved?

YesNo

Provide development permit conflict number:

Is there on-site generation associated with this project?

YesNo

Is the generation stand alone or distributed?

Stand aloneDistributed

Any additional details:

Start over Next

Your new service

Location:

OverheadUnderground

Phase:

Single phaseThree phase

Voltage:

Amperage:

Please accept that Current Transformer (CT) Metering and a dedicated electrical room is required for metered services greater than 200A. See metering guidelines for more information.

Start over Next

Additional details

Type of Load (commercial, warehouse, residential tower, data centre, etc.):

Building(s) Square Footage:

Number of transformers:

Size of transformers (kVA):

Total Transformer Capacity (kVA):

Anticipated demand load (kVA):

Staging/Timeline of Load Addition:

Description of Load Addition (type of development, modes of operation, intended uses, preferred/alternate sources, etc.):

Largest motor size (hp) (if applicable):

No motor499hp or smaller500hp or larger

List motor size (hp):

Additional motor information

Type (Induction or Synchronous):

Horse Power (hp):

Rated Voltage (V):

Efficiency:

Power Factor (PF):

Locked Rotor Power Factor (PF):

Number of times started per day:

National Electric Manufacturers Associateion (NEMA) code:

Starting method (Select one of the listed starting Methods):

Across the line starting

Resistor assistance

Capacitor assistance

Auto transformer

Variable frequency drive

Other type of starting method

Provide ohms:

Provide kVAR:

Provide Tap%, Nominal rating in kA, Z%, Primary Voltage in kVLL, and X/R:

Provide starting current in % of rated current OR starting current in % of locked-rotor current:

Provide starting current and full-load current:

What process / operation is the motor used for:

Secondary cable size:

Is it a parallel run?

YesNo

Have you received email notification from ENMAX or the City of Calgary that there is a development permit conflict to be resolved?

YesNo

Provide development permit conflict number:

Is there on-site generation associated with this project?

YesNo

Is the generation stand alone or distributed?

Stand aloneDistributed

Any additional details:

Start over Next

Additional details

Please add any additional information about your project to help us better understand the scope/location.

Have you received email notification from ENMAX or the City of Calgary that there is a development permit conflict to be resolved?

YesNo

Provide development permit conflict number:

Is there on-site generation associated with this project?

YesNo

Is the generation stand alone or distributed?

Stand aloneDistributed

Start over Next

Your new service

Location:

OverheadUnderground

Phase:

Single phaseThree phase

Voltage:

Amperage:

Please accept that Current Transformer (CT) Metering and a dedicated electrical room is required for metered services greater than 200A. See metering guidelines for more information.

Start over Next

Additional details

Type of Load (commercial, warehouse, residential tower, data centre, etc.):

Building(s) Square Footage:

Number of transformers:

Size of transformers (kVA):

Total Transformer Capacity (kVA):

Anticipated demand load (kVA):

Staging/Timeline of Load Addition:

Description of Load Addition (type of development, modes of operation, intended uses, preferred/alternate sources, etc.):

Largest motor size (hp) (if applicable):

No motor499hp or smaller500hp or larger

List motor size (hp):

Additional motor information

Type (Induction or Synchronous):

Horse Power (hp):

Rated Voltage (V):

Efficiency:

Power Factor (PF):

Locked Rotor Power Factor (PF):

Number of times started per day:

National Electric Manufacturers Associateion (NEMA) code:

Starting method (Select one of the listed starting Methods):

Across the line starting

Resistor assistance

Capacitor assistance

Auto transformer

Variable frequency drive

Other type of starting method

Provide ohms:

Provide kVAR:

Provide Tap%, Nominal rating in kA, Z%, Primary Voltage in kVLL, and X/R:

Provide starting current in % of rated current OR starting current in % of locked-rotor current:

Provide starting current and full-load current:

What process / operation is the motor used for:

Secondary cable size:

Is it a parallel run?

YesNo

Have you received email notification from ENMAX or the City of Calgary that there is a development permit conflict to be resolved?

YesNo

Provide development permit conflict number:

Is there on-site generation associated with this project?

YesNo

Is the generation stand alone or distributed?

Stand aloneDistributed

Any additional details:

Start over Next

Additional details

Please add any additional information about your project to help us better understand the scope/location.

Have you received email notification from ENMAX or the City of Calgary that there is a development permit conflict to be resolved?

YesNo

Provide development permit conflict number:

Is there on-site generation associated with this project?

YesNo

Is the generation stand alone or distributed?

Stand aloneDistributed

Start over Next

Your existing service

Location:

OverheadUnderground

Phase:

Single phaseThree phase

Voltage:

Amperage:

Start over Next

Your new service

Location:

OverheadUnderground

Phase:

Single phaseThree phase

Voltage:

Amperage:

Please accept that Current Transformer (CT) Metering and a dedicated electrical room is required for metered services greater than 200A. See metering guidelines for more information.

Start over Next

Additional details

Type of Load (commercial, warehouse, residential tower, data centre, etc.):

Building(s) Square Footage:

Number of transformers:

Size of transformers (kVA):

Total Transformer Capacity (kVA):

Anticipated demand load (kVA):

Staging/Timeline of Load Addition:

Description of Load Addition (type of development, modes of operation, intended uses, preferred/alternate sources, etc.):

Largest motor size (hp) (if applicable):

No motor499hp or smaller500hp or larger

List motor size (hp):

Additional motor information

Type (Induction or Synchronous):

Horse Power (hp):

Rated Voltage (V):

Efficiency:

Power Factor (PF):

Locked Rotor Power Factor (PF):

Number of times started per day:

National Electric Manufacturers Associateion (NEMA) code:

Starting method (Select one of the listed starting Methods):

Across the line starting

Resistor assistance

Capacitor assistance

Auto transformer

Variable frequency drive

Other type of starting method

Provide ohms:

Provide kVAR:

Provide Tap%, Nominal rating in kA, Z%, Primary Voltage in kVLL, and X/R:

Provide starting current in % of rated current OR starting current in % of locked-rotor current:

Provide starting current and full-load current:

What process / operation is the motor used for:

Secondary cable size:

Is it a parallel run?

YesNo

Have you received email notification from ENMAX or the City of Calgary that there is a development permit conflict to be resolved?

YesNo

Provide development permit conflict number:

Is there on-site generation associated with this project?

YesNo

Is the generation stand alone or distributed?

Stand aloneDistributed

Any additional details:

Start over Next

Additional details

Please add any additional information about your project to help us better understand the scope/location.

Have you received email notification from ENMAX or the City of Calgary that there is a development permit conflict to be resolved?

YesNo

Provide development permit conflict number:

Is there on-site generation associated with this project?

YesNo

Is the generation stand alone or distributed?

Stand aloneDistributed

Start over Next

Your new service

Location:

OverheadUnderground

Phase:

Single phaseThree phase

Voltage:

Amperage:

Please accept that Current Transformer (CT) Metering and a dedicated electrical room is required for metered services greater than 200A. See metering guidelines for more information.

Start over Next

Additional details

Type of Load (commercial, warehouse, residential tower, data centre, etc.):

Building(s) Square Footage:

Number of transformers:

Size of transformers (kVA):

Total Transformer Capacity (kVA):

Anticipated demand load (kVA):

Staging/Timeline of Load Addition:

Description of Load Addition (type of development, modes of operation, intended uses, preferred/alternate sources, etc.):

Largest motor size (hp) (if applicable):

No motor499hp or smaller500hp or larger

List motor size (hp):

Additional motor information

Type (Induction or Synchronous):

Horse Power (hp):

Rated Voltage (V):

Efficiency:

Power Factor (PF):

Locked Rotor Power Factor (PF):

Number of times started per day:

National Electric Manufacturers Associateion (NEMA) code:

Starting method (Select one of the listed starting Methods):

Across the line starting

Resistor assistance

Capacitor assistance

Auto transformer

Variable frequency drive

Other type of starting method

Provide ohms:

Provide kVAR:

Provide Tap%, Nominal rating in kA, Z%, Primary Voltage in kVLL, and X/R:

Provide starting current in % of rated current OR starting current in % of locked-rotor current:

Provide starting current and full-load current:

What process / operation is the motor used for:

Secondary cable size:

Is it a parallel run?

YesNo

Have you received email notification from ENMAX or the City of Calgary that there is a development permit conflict to be resolved?

YesNo

Provide development permit conflict number:

Is there on-site generation associated with this project?

YesNo

Is the generation stand alone or distributed?

Stand aloneDistributed

Any additional details:

Start over Next

Additional details

Please add any additional information about your project to help us better understand the scope/location.

Have you received email notification from ENMAX or the City of Calgary that there is a development permit conflict to be resolved?

YesNo

Provide development permit conflict number:

Is there on-site generation associated with this project?

YesNo

Is the generation stand alone or distributed?

Stand aloneDistributed

Start over Next

Additional details

Please add any additional information about your project to help us better understand the scope/location.

Type of Load (commercial, warehouse, residential tower, data centre, etc.):

Building(s) Square Footage:

Number of transformers:

Size of transformers (kVA):

Total Transformer Capacity (kVA):

Anticipated demand load (kVA):

Staging/Timeline of Load Addition:

Description of Load Addition (type of development, modes of operation, intended uses, preferred/alternate sources, etc.):

Largest motor size (hp) (if applicable):

No motor499hp or smaller500hp or larger

List motor size (hp):

Additional motor information

Type (Induction or Synchronous):

Horse Power (hp):

Rated Voltage (V):

Efficiency:

Power Factor (PF):

Locked Rotor Power Factor (PF):

Number of times started per day:

National Electric Manufacturers Associateion (NEMA) code:

Starting method (Select one of the listed starting Methods):

Across the line starting

Resistor assistance

Capacitor assistance

Auto transformer

Variable frequency drive

Other type of starting method

Provide ohms:

Provide kVAR:

Provide Tap%, Nominal rating in kA, Z%, Primary Voltage in kVLL, and X/R:

Provide starting current in % of rated current OR starting current in % of locked-rotor current:

Provide starting current and full-load current:

What process / operation is the motor used for:

Have you received email notification from ENMAX or the City of Calgary that there is a development permit conflict to be resolved?

YesNo

Provide development permit conflict number:

Is there on-site generation associated with this project?

YesNo

Is the generation stand alone or distributed?

Stand aloneDistributed

Start over Next

Additional details

Type of Load (commercial, warehouse, residential tower, data centre, etc.):

Building(s) Square Footage:

Number of transformers:

Size of transformers (kVA):

Total Transformer Capacity (kVA):

Anticipated demand load (kVA):

Staging/Timeline of Load Addition:

Description of Load Addition (type of development, modes of operation, intended uses, preferred/alternate sources, etc.):

Largest motor size (hp) (if applicable):

No motor499hp or smaller500hp or larger

List motor size (hp):

Additional motor information

Type (Induction or Synchronous):

Horse Power (hp):

Rated Voltage (V):

Efficiency:

Power Factor (PF):

Locked Rotor Power Factor (PF):

Number of times started per day:

National Electric Manufacturers Associateion (NEMA) code:

Starting method (Select one of the listed starting Methods):

Across the line starting

Resistor assistance

Capacitor assistance

Auto transformer

Variable frequency drive

Other type of starting method

Provide ohms:

Provide kVAR:

Provide Tap%, Nominal rating in kA, Z%, Primary Voltage in kVLL, and X/R:

Provide starting current in % of rated current OR starting current in % of locked-rotor current:

Provide starting current and full-load current:

What process / operation is the motor used for:

Have you received email notification from ENMAX or the City of Calgary that there is a development permit conflict to be resolved?

YesNo

Provide development permit conflict number:

Is there on-site generation associated with this project?

YesNo

Is the generation stand alone or distributed?

Stand aloneDistributed

Start over Next

Additional details

Please add any additional information about your project to help us better understand the scope/location.

Have you received email notification from ENMAX or the City of Calgary that there is a development permit conflict to be resolved?

YesNo

Provide development permit conflict number:

Is there on-site generation associated with this project?

YesNo

Is the generation stand alone or distributed?

Stand aloneDistributed

Start over Next

File uploads

Single Line Diagrams and Site Plans will be required for most projects. Limit of 10 files and up to 25 MB per file. File formats can be jpeg, jpg, pdf or png.

Please attach a single line diagram:

Browse

Please attach site plan and photos:

Browse

Start over Next

Project information

Municipal address and street designation (Your project address/location):

City:

Province:

Postal code:

Requested completion date:

Contact details

Please provide the information of the person to contact about this project.

Property owner name:

Company name:

Property owner phone number:ext.

Property owner mobile number:

Contact email:
Please note: this is the email that the copy of this form will be sent to.

Start over Next

Billing information

Billing details

Please provide billing information in the fields below.

Select the checkbox if the billing address is same as the project address.

Contact name:

Company name:

Contact phone number:ext.

Contact mobile number:

Contact email:

Address:

City:

Province:

Postal code:

Start over Next

On-site contact information

On-site contact details

Please provide the information of the person working on-site for this project.

Do you have on-site contact information?

YesNo

Contact name:

Company:

Contact phone number:ext.

Contact mobile number:

Contact email:

Please complete the Captcha to continue.

Submit

Are you sure you want to cancel?

Cancelling will clear your information and you will need to start over.

Are you sure you want to cancel?

Cancelling will clear your information and you will need to start over.

Are you sure you want to cancel?

Cancelling will clear your information and you will need to start over.

Services
Electricity Services
Get Connected

CONTACT US

Got a billing question? Want to report a power outage? We've got all the contacts you need.

View contact directory

Interested in finding out more about the ENMAX community? Come visit us.

FEEDBACK

Help us improve enmax.com by sharing your recent online experience with us.

Take our survey

SCREEN SHARE TROUBLESHOOTING

Please make sure:

Your browser is up to date
Pop-up blockers are turned off.

Customers are free to purchase natural gas services or electricity services from a retailer of their choice. For a list of retailers, visit ucahelps.alberta.ca or call 310-4822 (toll free in Alberta).

Legal

Privacy

For new services, transfers or renewals, please call 310-2010 or click here to self serve online.